Milesight MS-C5364-PB - Page 44

38
Day To Night Value
This is the sensitivity for switching Day Mode to Night Mode. When IR Light
Sensor Current Value is lower than this value, it will switch Day Mode to Night
Mode
Night To Day Value
This is the sensitivity for switching Night Mode to Day Mode. When IR Light
Sensor Current Value is higher than this value, it will switch Night Mode to Day
Mode
IR Light Sensor Value
The current value of the IR light sensor
Smart IR Mode
With the combination of the High Beam and Low Beam, The IR LEDs technology
has been upgraded to provide better image clarity and quality regardless of the
object distance. Also, the Low Beam and High Beam's brightness can be adjusted
manually or automatically on the basis of the Zoom ratio. Moreover, with the IR
anti-reflection panel, the infrared light transmittance is highly increased.
Support to set the strength of the IR to Auto Mode or Customize to achieve the
best effect.
Near view level
Adjust the light strength of Low-Beams LED light level from 0 to 100.
Far view level
Adjust the light strength of High-Beams LED light level from 0 to 100.
IR Strength Value
The current value of Low-Beams LED and High-Beams LED light value
Day/Night Switch
Refocus
With this option enabled, the camera will refocus when switching between day
mode and night mode.
Outdoor/Indoor Mode
Select indoor or outdoor mode to meet your needs
Corridor Mode
There are three options available, you can select one to meet your need
Off: Keep the image in normal direction
Clockwise 90°: Rotate the image by 90° clockwise
Anticlockwise 90°: Rotate the image by 90° anticlockwise
Image Rotation
There are four options available, you can select one to meet your need
Off: Keep the image in normal direction
Rotating 180°: Upside down the image
Flip Horizontal: Flip the image horizontally
Flip vertical: Flip the image vertically
Local Display Video
(Only for Pro Bullet)
Select NTSC or PAL for local display
Smoked Dome Cover
This function is only for Pro Dome. If Pro Dome is equipped with a Smoked Dome
Cover, enable this function to display a normal image.
Lens distort correct
(Only for 180°
Panoramic Mini Bullet)
There are two options available, you can select one to meet your need
Off: Select the original image of 180°Panoramic Mini Bullet
On: Select the dewarping image of 180°Panoramic Mini Bullet
Enhancement