Milesight MS-C5364-PB - Email Encryption and FTP Setup

53
Table 4-4-14 Description of the buttons
Parameters
Function Introduction
Enable
Check the checkbox to enable Email function
User Name
The sender's name. It is usually the same as the account name
Sender Email Address
Email address to send video files attached emails
Password
The password of the sender
SMTP Server
The SMTP server IP address or host name(e.g. smtp.gmail.com)
SMTP Port
The default TCP/IP port for SMTP is 25(not secured). For SSL/TLS port, it depends
on the mail you use
Recipient Email
Address1
Email address to receive video files
Recipient Email
Address2
Email address to receive video files
Encryption
Check the checkbox to enable SSL or TLS if it is required by the SMTP server.
FTP
Alarm video files can be sent to specific FTP server. You must configure the FTP settings correctly
before using it.