Need help?Do you have a question about the Milesight UC300 and is the answer not in the manual?
General| Brand | Milesight |
|---|---|
| Model | UC300 |
| Category | Controller |
| Language | English |
Essential safety guidelines and warnings for operating the UC300 device.
A general overview of the UC300 IoT controller's function and purpose.
Highlights the key features and capabilities of the UC300 device.
Lists all the items included in the UC300 package.
Details on the UC300's hardware components, ports, and indicators.
Provides diagrams and instructions for wiring the UC300 with sensors and power.
Explains the meaning of different LED states for system status monitoring.
Describes the function and operation of the device's reset button for troubleshooting.
Specifies the physical dimensions of the UC300 device for installation planning.
Step-by-step guide for installing the SIM card in the cellular version of UC300.
Instructions on how to properly install the external antenna for optimal signal.
Detailed steps for mounting the UC300 device onto a wall using brackets.
Instructions for mounting the UC300 device using a standard DIN rail clip.
Guide on downloading and logging into the UC300 configuration ToolBox software.
Configuration parameters for various network communication methods like LoRaWAN, Cellular, and SMS.
Configuration for various data input/output interfaces and serial communication protocols.
Setting up automated actions based on specific device conditions or events.
Configuration for direct device-to-device communication using the LoRa D2D protocol.
Procedures for upgrading firmware, backing up configurations, and resetting the device.
To Next Page
