Functions
Switch the power ON
After all connections have been completed, rotate
the volume knob to the left (= minimum volume level)
before switching the power on.
Set the power switch to “ON” position to switch on the
power. The display then shows the kit‘s number and
its indicator lights up.
Set the main volume
While hitting a pad, gradually rotate the volume knob
until a comfortable volume level is reached.
Select a drum kit
The unit comes with 10 (001-010) preset drum kits
and 5 user kits (011-015).
Press the KIT button to enter KIT selecting mode,
3-digit LED displays the current KIT number and the
KIT indicator lights up.
In kit selecting mode, press + or – button to choose
any KIT (001-015, in cycle) as the current KIT.
Adjust the kit volume
In KIT selecting mode, press the VOLUME button to
enter volume adjusting mode, the volume indicator
lights up and the 3-digit LED displays the current
kit volume value. Adjust its value by pressing the
+/– buttons. (0-16, not in cycle). Then press the KIT
button again to enter the KIT selecting mode. The
volume indicator goes out.
Please note that in recording waiting mode, the KIT
volume value can be shown on the display but it can
not be adjusted.
To Next Page
Loading...
Need help?
General
