www.thomann.de
13
Recording
Enter the recording waiting mode
Press and hold the SAVE button for about 2 seconds,
to enter user pattern recording waiting mode. The
3-digit LED displays the KIT number and the REC
indicator ashes. In recording waiting mode the
correspondent parameter can be adjusted.
Q
Adjust pattern number as accompaniment.
Q
Adjust tempo value.
Q
Adjust KIT number.
Q
Switch drum off status.
Q
Turn on/off click.
In the Recording Waiting Mode, press the PATTERN
button to show the pattern (---/001~040) as
accompaniment for recording. Use the +/– buttons
to select the accompaniment. If “---” is selected, that
means the user would like to record a solo drum part.
Note:
VOICE selecting function is not available for the user
in recording waiting mode and time signature.
Enter recording mode
Press the START/STOP button or hit the pads to
enter recording mode. Then the REC indicator lights
all along and the 3-digit LED displays recording
measures.
Q
During recording, the original data will be replaced
with the newly recorded user pattern.
Q
One measure introductory beat (such as 4/4,display:
-4, -3, -2, -1).
Q
No parameters can be adjusted during recording.
Only „START/STOP“ and „CLICK“ buttons function
during recording.
Q
The click sound will not be recorded.
Stop recording
When the recording memory is full, the recording
automatically stops and the REC indicator goes out.
The 3-digit LED displays ‘ful’, then press the START/
STOP button to return to NO.41 PATTERN display.
If you press the START/STOP button during recording,
the recording will stop and the REC indicator goes
out. The unit then returns to NO.41 PATTERN display.
To Next Page
Loading...
Need help?
General
