www.thomann.de
15
Adjust the pattern tempo
Press the TEMPO button to enter tempo adjustment
mode. The 3-digit LED then temporarily displays
TEMPO value.
Press the +/– buttons to change the tempo of click
and pattern playing (30-280, not in cycle).
Press + and – button at the same time, to reset to the
default value (the current pattern default tempo).
Click
Press the CLICK button to turn on/off the click
function. The 3-digit LED displays the current time
signature, and the click indicator lights and ash.
Press the +/– buttons to change the current time
signature. Press the CLICK button again to turn off the
click function.
9 kinds of time signatures can be chosen (1/4, 2/4,
3/4, 4/4, 5/4, 6/4, 7/4, 3/8, 6/8).
As a pattern is playing, the click indicator
automatically ashes according to the pattern beat,
but the click sound will not be turned on automatically.
Select a click sound
Press and hold the CLICK button, then press the
+/– buttons to adjust the click sound. The 3-digit LED
temporarily displays the current click sound ‘CLX’.
The drum module supports 4 click sounds:
metronome, beep, cowbell and voice. When turning
on the click, the default sound is “metronome”.
To Next Page
Loading...
Need help?
General
