www.thomann.de
11
Select a pad voice
The drum module provides 108 built-in drum voices in
total to choose from.
Press the VOICE button to enter pad voice selecting
mode. The 3-digit LED displays the current pad voice
number and the voice indicator lights up.
In the pad voice selecting mode, press +/– buttons to
choose the voice of the current pad or cymbal (1-108,
in cycle).
Adjust the pad volume
In voice selecting mode, press the VOLUME button to
enter pad volume adjusting mode. Then the volume
indicator lights up and the LED displays the current
pad volume value.
Press the +/– buttons to adjust its value (0-16, not in
cycle).
Press the VOICE button again to enter voice selecting
mode.
Save kit
Press the SAVE button to enter KIT saving mode. The
LED displays the user KIT number to save, the KIT
indicator lights up and the user KIT number ashes.
Press +/– buttons to choose the user KIT (11-15, in
cycle) to save. During choosing the KIT, the user KIT
number will keep ashing.
Press the SAVE button again. The current KIT setting
(including all pads voice numbers and volume) is
saved into the selected user KIT.
When in recording mode, this function is not available
to the user.
To Next Page
Loading...
Need help?
General
