OM-626 Page 15
5-2. Cleaning Coolant Strainer
READ SAFETY BLOCKS at start of
Section 5 before proceeding.
WARNING
Ref. ST-159 301
Turn Off and unplug unit.
1 Coolant Pump
2 Acorn Nut
Place cloth or suitable container un-
der nut, and remove nut.
3 Rubber Washer
4 Strainer
Rinse strainer with clean water.
Reinstall parts. Remove cloth or
container, and reinstall wrapper.
15/16 in
Tools Needed:
1
2
3
4
3/8 in
Figure 5-2. Cleaning Coolant Strainer
5-3. Lubricating Motor
READ SAFETY BLOCKS at start of
Section 5 before proceeding.
WARNING
Ref. ST-159 301 / Ref. ST-159 334
Turn Off and unplug unit.
1 Motor
2 Oil Port
Remove plugs, and put 15 drops of
SAE 20 motor oil into each port.
Reinstall plugs and wrapper.
12
Front
Top View
3/8 in
Tools Needed:
Figure 5-3. Lubricating Motor
To Next Page
Loading...
