Complete Parts List available at www.MillerWelds.com
OM-279640 Page 15
SECTION 3 − DEFINITIONS
3-1. Additional Safety Symbols And Definitions
Some symbols are found only on CE products.
Warning! Watch Out! There are possible hazards as shown by the symbols.
Safe1 2012−05
Wear dry insulating gloves. Do not touch electrode with bare hand. Do not wear wet or damaged gloves.
Safe2 2017−04
Protect yourself from electric shock by insulating yourself from work and ground.
Safe3 2017−04
Keep your head out of the fumes.
Safe6 2017−04
Use forced ventilation or local exhaust to remove the fumes.
Safe8 2012−05
Use ventilating fan to remove fumes.
Safe10 2012−05
Keep flammables away from welding. Do not weld near flammables.
Safe12 2012−05
Welding sparks can cause fires. Have a fire extinguisher nearby, and have a watchperson ready to use it.
Safe14 2012−05
Do not weld on drums or any closed containers.
Safe16 2017−04
Do not remove or paint over (cover) the label.
Safe20 2017−04
To Next Page
Loading...
Need help?
General
