Complete Parts List available at www.MillerWelds.com
OM-279640 Page 17
Kasjf;laksf;lkasdf'l;aksdf;lkasd;flksadflkasd;lk
Kasjf;laksf;lkasdf'l;aksdf;lkasd;flksadflkasd;lk
Kasjf;laksf;lkasdf'l;aksdf;lkasd;flksadflkasd;lk
Become trained and read the instructions before working on the
machine or welding.
Safe40 2012−05
=
Engine fuel plus flames or sparks can cause fire.
Safe45 2012−05
Remove unit from shipping crate. Remove Owner’s Manual from unit.
Follow instructions to install muffler.
Safe46 2012−05
Read Owner’s Manual. Read labels on unit.
Safe47 2012−05
/
<12.4 V
+ − + −
Read Owner’s Manual for battery maintenance information.
Safe117 2014−06
0 - 50 h std
Safe54 2017−04
During the first 50 hours of operation keep welding load above 200
amperes. Do not weld below 200 amperes of output.
50 h std
Safe55 2012−05
After the first 50 hours of operation, change the engine oil and filter.
Never use generator inside a home or garage, even if doors and win-
dows are open.
Safe87 2012−07
Only use generator outside and far away from windows, doors, and
vents.
Safe88 2012−07
3-2. Miscellaneous Symbols And Definitions
Some symbols are found only on CE products.
A
Amperage
V
Voltage
Hz
Hertz
Seconds
Read Operator’s
Manual
Negative
Positive
Direct Current
(DC)
Alternating
Current (AC)
To Next Page
Loading...
Need help?
General
