Safety Information
Symbol What it means
This UV RADIATION sticker is used to refer to a position on the system cabinet
or inside of it where exposure to UV light is possible.
This HAZARD sticker is used to refer to a position on the system cabinet or
inside of it that could be hazardous.
This ELECTRICAL GROUND sticker is used to refer to a position on the
system cabinet or inside where an electrical ground connection is made.
This ELECTRICAL HAZARD sticker is used to refer to a position on the system
cabinet or inside where an electrical danger could exist.
This HOT SURFACE sticker is used to refer to a position on the system cabinet
or inside where a hot surface could exist.
• The System must be connected to a source of electrical power that is
earth grounded.
• Only an authorized person following the local safety regulations can work
on this equipment.
• Unplug the electrical power cord before plugging in or removing any
components on the electronic board(s).
6 | Safety Information
To Next Page
Loading...
Need help?
General
