Milli-Q IQ 7015 User Manual

17
Dierent settings are available to customize the water purication system operation.
Depending on the user prole (end-user operator / system manager) some of the settings will
have either read-only or read & write access.
SETTINGS MENU
Settings End-user
System
Manager
System
Conguration
Screen saver Read only
Water sensor Read only
Alarm relay Read only
Production
conguration
Periodic EDI rinsing check time Read only
Periodic EDI rinsing duration Read only Read only
Periodic EDI rinsing period Read only Read only
Tank conguration Tank capacity Read only Read only
Tank rell setpoint Read only
ech2o ASM lamp cycle start hour Read only
Distribution
conguration
Lab close
Recirculation Duration Read only Read only
Safety ow stop Read only
Dispensing Mode Read only
Production alarm
conguration
EDI resistivity Read only
Permeate conductivity Read only
RO ionic rejection Read only
RO feed conductivity RO high Read only
RO feed conductivity tap high Read only
Inlet strainer clean Read only
Cl2 clean Read only
IPAK Gard lifetime
IPAK Gard volume
Tank alarm
conguration
Vent Filter
Tank empty Read only

Milli-Q IQ 7015 Specifications

General

Brand	Milli-Q
Model	IQ 7015
Category	Water Filtration Systems
Language	English