Maintenance
32
ech
2
o UV lamps - mercury free
Contact the technical support hotline to organize a
replacement visit.
It is highly recommended to have a qualied Milli-Q
eld service representative to change the ech
2
o UV
lamps. Replacement of the lamps involves removing
the panels of the Milli-Q system.
Hazardous voltage!
Hazard of electrical arc ash will
cause death or serious injury.
Important! Never open the system, even when the power switch has been switched o.
It is not sucient to switch o the system, the plug must be physically removed from its power
source. Installation and maintenance should only be done by a qualied person. Appropriate
personal protective equipment (PPE) must be worn and safe work practices must be followed.
To Next Page
Loading...
Need help?
General
