Millipore Sigma Scepter 3.0 - Technical Specifications; Contact Information; Technical Assistance; Standard Warranty

00110230w Rev 10/20 22 of 24
Specifications
Scepter™ 3.0 Instrument Body
Body Material
Acrylonitrile butadiene styrene (ABS) body, polycarbonate digital screen,
silicone control buttons
Height 28.321 cm (11.15 in.)
Width 6.350 cm (2.5 in.)
Depth 10.922 cm (4.3 in.)
Weight (approximate) 229.5 g (0.5 lb)
Wireless Connection Specifications
Wireless (Wi-Fi
®
, WLAN)
Network
IEEE 802.11 b/g/n, 1MByte/s, up to 25m line-of-sight 2.4 Ghz
Bluetooth
®
Network
IEEE 802.15.1, support FTP, OPP and Bluetooth
®
2.4 Ghz Low Energy
features, 8m line-of-sight
Electrical Specifications
Handheld Instrument Internal rechargeable 3.7 V lithium ion battery
Charging Station
to Recharge Battery
Input 100–240 V~ (50/60 Hz), 0.2 A
Output 5 Vdc, 1 A
Operating Environmental Conditions
Temperature 15 °C to 25 °C
Maximum Relative Humidity 20–80% (non-condensing)
Storage Conditions
Temperature 15 °C to 30 °C
Maximum Relative Humidity 20-80% (non-condensing)
Scepter™ 3.0 Sensor
Material Polycarbonate with mylar polyester film
Height 8.6 cm (3.4 in.)
Width 1.6 cm (0.6 in.)
Weight 2.3 g (0.1 oz)
Aspiration Volume 50 µL
Sensor Orifice/Aperture 40 µm or 60 µm
Sensor Performance 40 µm sensor 60 µm sensor
Sample Volume Required ≥ 100 µL ≥ 100 µL
Operating Range
Cell Size
Cell Concentration
5 µm–15 µm
50,000–1,500,000 cells/mL
8 µm–25 µm
10,000–500,000 cells/mL
Processing Time < 40 seconds < 30 seconds
Contact Information
For the location of the office nearest you, go to SigmaAldrich.com/offices.
Technical Assistance
Visit the tech service page on our web site at SigmaAldrich.com/techservice.
Standard Warranty
The applicable warranty for the products listed in this publication may be found at SigmaAldrich.com/terms.