Millipore Milliflex Plus - Controls and Display; A. Keypad

13
Caution: the pump will not be VHP resistant if the O-ring or any screws are removed. The pump head must
remain in place on the pump during VHP cycle to maintain VHP resistance. The white cover delivered with the
pump head does NOT ensure VHP resistance of the pump.
4. Typical installation
Millipore
VHP
ON
C
OK
START
OFF
Millipore
VHP
ON
C
OK
START
OFF
Millipore
VHP
ON
C
OK
START
OFF
6. Controls and display
A. Keypad
Display
Keypad control
Arrow buttons
(scroll through
selections)
OK button
(accept or go
to next level)
START button
Power ON/OFF button
C button
(cancel or return
to previous level)