To Next PageTo Next Page
Need help?Do you have a question about the Millipore Milliflex Oasis and is the answer not in the manual?
General| Sterility | Sterile |
|---|---|
| Application | sterility testing |
| Pore Size | 0.45 μm |
| Detection Method | Colony counting |
| Filtration Membrane Material | Mixed cellulose esters |
| Membrane Pore Size | 0.45 µm |
| Compatibility | Compatible with Milliflex Plus pump |
| Packaging | Individually packaged |
Lists essential hardware items needed to operate the system.
Details the contents of various Milliflex Oasis system packages.
Explains the functionality and correct usage of the pump's touch switch.
Describes how to handle and store Milliflex Oasis filtration units.
Details the process of handling and preparing media plates for testing.
Guides on how to place filtration units and start the filtration process.
Explains how to stack and dispose of used filtration units and membrane supports.
Provides a table outlining cleaning and maintenance tasks for system components.
Lists tested surface and internal flow sanitizers and their supplier information.
Instructions for cleaning the filtration heads.
Steps for cleaning the exterior of the pump, tubing, and cable.
Recommends rinsing the pump with purified water after use.
Details on removing and cleaning the external gasket of the filtration head.
Step-by-step guide for sanitizing the internal flow path of the pump.
Instructions for a thorough cleaning of the filtration head and its components.
Procedures for replacing filtration head gaskets and check valves.
Steps for replacing gaskets on the sanitization kit.
Lists the necessary pumps, cables, and power supplies for multi-pump setups.
Guides on how to install multiple pumps for daisy-chaining.
Lists various pre-filled Milliflex cassettes for specific microbial detection.
Instructions on how to prepare empty cassettes for custom media.
