Milnor MCT12E5 User Manual

Page (1 / 2)
PLAN VIEW
FRONT VIEW
REAR VIEW
C H
Notes:
1. Replace placard immediately, if
removed or unreadable.
2. Approximate locations of
placards are shown. Mounting
holes are provided on machine.
If aluminum placard, use #8
Self-tapping screws.
BMP050019/2018484A
Safety Placard Use and Placement
MCR12E5, MCR16E5, MCR18E4, MCR27E5, MCT12E5, MCT16E5, MCT18E4, MCT27E5, MCR36E4
50
10
30
40 60
20
PELLERIN MILNOR CORPORATION
10

Milnor MCT12E5 Specifications

General

Brand	Milnor
Model	MCT12E5
Category	Washer
Language	English