Motor Maintenance
PELLERIN MILNOR CORPORATION
3.
Grease Types and Procedures
Table 4: Type of Grease
Rating from Table 2
Type of Grease
Typical
Bad
Shell Dolium R, Chevron SRI, or equivalent
Very Bad
Darmex 707 or equivalent
CAUTION 4 : Damage and Malfunction Risks—Too much grease gun pressure can put
grease in the motor and cause electrical components to burn out. If grease touches a brake or a
clutch surface, this can cause a malfunction.
• Apply grease carefully.
Apply grease as follows:
1. Remove power from the machine (see Notice P1).
2. Clean grease fittings.
3. If the motor has a grease outlet plug, remove it.
4. Add the recommended quantity of grease (See Item 5). Stop immediately if you see new
grease around the motor shaft, wires or the grease outlet plug.
5. If the motor has a grease outlet plug, replace it.
— End of BIUUUM03 —
44
To Next Page
Loading...
Need help?
General
