MIMAKI JFX200-2513EX User Manual (English)

Other manuals for MIMAKI JFX200-2513EX

Operation Manual176 pages

Requests For Daily Care And Maintenance28 pages

Questions and Answers:

N
Nancy WardAug 14, 2025
What to do if my MIMAKI Printer image quality is poor?
- C
  Christopher MooreAug 14, 2025
  If the image quality of your MIMAKI Printer is poor, consider the following: * If you notice white lines, blur, or dark lines in the direction of head movement: * Execute head cleaning. * Perform maintenance inside the station. * Clean any dirt, pieces of paper, or trash along the area where the head passes. * If there is misalignment in reversible printing, correct the drop position. * If ink drips during printing: * Clean the wiper. * Clean the ink cap. * Clean around the head. * Execute head cleaning [NORMAL].
R
rcollinsAug 17, 2025
What to do if my MIMAKI JFX200-2513EX does not start printing?
- L
  Lisa RayAug 17, 2025
  If your MIMAKI Printer does not start printing, it could be due to: * The data not being transmitted properly. Use the cable exclusive for this machine. * The printing function not working correctly or the media not installed correctly. Securely connect the interface cable. * The ink has run out. Replace the ink bottle with a new one.
P
Paige MoraAug 20, 2025
What to do if MIMAKI JFX200-2513EX Printer nozzle is clogged?
- A
  Andrew PhillipsAug 20, 2025
  If the nozzle on your MIMAKI Printer is clogged, try the following: 1. Perform maintenance daily. 2. Execute head cleaning (NORMAL). 3. Execute head cleaning (HARD). 4. If the nozzle remains clogged after head cleaning, perform the steps mentioned for when nozzle clogging cannot be restored.
M
Margaret LarsenAug 25, 2025
What to do if MIMAKI JFX200-2513EX Printer detects ink bottle error?
- S
  Stephanie MartinAug 25, 2025
  If your MIMAKI Printer detects an ink bottle error: * Check that the ink IC chip in the ink cover is set correctly. * Replace the ink bottle with a new one immediately. * Perform the operation to check the details of the ink bottle error.
B
bwoodwardAug 27, 2025
Why MIMAKI JFX200-2513EX Printer power does not turn on?
- E
  eric25Aug 27, 2025
  The MIMAKI Printer may not power on due to several reasons: * The power cable might not be properly connected to the machine or the computer. Ensure the power cable is securely connected. * The power cable may not be connected at all. Connect the power cable securely. * The main power might not be turned on. Turn the main power on. * The power button on the front of the machine might not be pressed. Press the power button located at the front of the machine.
J
Jennifer ChandlerAug 31, 2025
What to do if pressure abnormality occurs in MIMAKI JFX200-2513EX Printer?
- A
  Angela AdamsAug 31, 2025
  If a pressure abnormality occurs in your MIMAKI Printer, it may be because the pressure controlled in the machine exceeds the control range due to environment and aging. Adjust the pressure immediately using the provided procedure to return the pressure to its normal value.
J
jorgemitchellSep 2, 2025
What to do if MIMAKI JFX200-2513EX negative pressure sensor is abnormal?
- D
  Dana GrossSep 3, 2025
  If the negative pressure sensor of your MIMAKI Printer is abnormal because its value is abnormal, adjust the pressure.
T
terrance40Sep 6, 2025
What to do if there is ink overflow from the sub tank of MIMAKI Printer?
- D
  Deborah JohnsonSep 6, 2025
  If there is ink overflow from the sub tank of your MIMAKI Printer, perform sub tank maintenance.
C
Christine WalkerSep 9, 2025
What to do if there is ink leakage in MIMAKI JFX200-2513EX Printer?
- S
  Shawn JohnsonSep 9, 2025
  Switch off the main power of the MIMAKI Printer, disconnect the power plug, and contact your local distributor, or our sales office or call center.