JFX200-2513EX
Requests for Daily Care and Maintenance
1
Routine Maintenance
JFX200-2513EX (hereafter called "this machine") is a precision machine with extremely fine mechanisms.
Especially, the nozzle surface of the head from where the ink is discharged may get affected by even a small
amount of adhered dust or paper powder, making it impossible to get normal print results.
To use it with better conditions, we recommend performing the following daily maintenance.
Maintenance timing
Maintenance timing Maintenance items (reference page)
Daily (after one day of work) "Maintenance of Head Surroundings"(P. 3)
"Cleaning wiper and cap"(P. 5)
"Cleaning the NCU"(P. 11)
Weekly (after a week of work) "Maintenance of Machine Exterior"(P. 12)
"Table Maintenance"(P. 12)
"Washing the Ink Discharge Passage"(P. 12)
"Disposing of Waste Ink"(P. 13)
"Cleaning around the station"(P. 16)
About once every one or two weeks "Replacing Carriage Filters"(P. 17)
"MBIS maintenance"(P. 18)
When an error occurs "Refilling the Coolant"(P. 20)
"Replacing the wiper"(P. 22)
Maintenance as necessary "Cleaning LED UV Unit"(P. 23)
"Ionizer Maintenance"(P. 23)
Tools necessary for maintenance
F-200/LF-200 Washing Liquid (PN: SPC-0568) Cleaning Stick for Head Surrounding (PN: SPC-0527)
Cotton swab Gloves
Soft cloth