24
Storage of Ink Bottles
Pay attention to the following points when storing ink bottles.
• Store in a place with low humidity and no direct sunlight.
• Do not drop or smash the ink bottle.
• Avoid contamination or electrostatic discharge of the Ink IC chip.
• Always store the ink bottle and Ink IC chip together.
Ink bottle and ink IC chip
Examples of Plotting Failure
Discharge failure of the head (head nozzle) due to dust is a typical example of plotting failure.
Periodically check the condition of the nozzle before output or during output to avoid using it in defective
state.
The condition of the nozzle can be checked by [TEST PRINT] of this machine.
(Operation Manual, Chapter 2 "Taking a Test Print")
Deflection Nozzle clogging
SatelliteInk dropping
Accessories Information
Part name Part No. Part name Part No.
Waste ink tank SL SPA-0197 Air filter kit SPA-0209
Bottle tightening jig kit SPA-0232 Layout pin kit SPA-0234
To Next Page
Loading...
