13
3
Press the [ENTER] key.
• Carriage moves onto the platen.
• Repeat the dry suction operation until the washing is complete.
DISWAY WASH
[ENT]
COMPLETED (NEXT)
4
Take washing liquid in a dropper and fill the cap with it until it is full.
• Fill the cap with washing liquid until it is about to overflow.
5
Press the [ENTER] key.
• After the dry suction operation is performed for 30 seconds, the display returns to Step 2.
Disposing of Waste Ink
• When disposing of the waste ink from the waste ink tank, be sure to wear the included safety glasses and
gloves.
Otherwise you may get ink in your eyes.
• Do not replace the waste ink tank while this machine is in operation (printing or cleaning).
• If waste ink overflows during work, wipe it off with a waste cloth.
1
Open waste ink tank cover.
• Remove the screws on the waste ink tank cover, and open the cover to the front.
Waste ink tank cover
Screw
To Next Page
Loading...
