3
(2) Capping Station ("Cleaning the Wiper and Cap" Chapter 4 of the Operation Manual)
The surrounding area of the cap is also liable to be stained by the dust and ink. It is recommended to clean
the head frequently using the maintenance liquid suitable for the ink used to avoid the stains on the head.
• Maintenance liquid (SPC-0568)
1
Move the carriage.
• Refer to the Step 1 to 4 of Chapter 4 “Cleaning the Wiper and Cap” of the user’s manual to perform the
operation.
2
Clean the cap.
• Dip the clean stick into the maintenance liquid and
wipe off the cap. Wipe off so that cleaning solution for
maintenance will not remain.
• Clean the cap rubber and cap rubber cover until it looks as shown
in the photo on the right.
• Make sure that the cap rubber and mesh inside the cap have not
come off after cleaning.
To Next Page
Loading...
