1
Inkjet printer JFX200-2531
Requests for Care and Maintenance
This machine is a precision machine equipped with extremely fine mechanisms. Especially, the nozzle sur-
face of the heads from which the ink is discharged is affected even by a slightest attachment of dust or paper
powder and the proper printing results could not be obtained. With a view to using this machine in a better
condition, we would like to recommend performing the following care and maintenance on daily basis.
1. When to care
When to care What to care Reference Page
Once a day
(at the end of the daily work)
Surroundings of the heads P.2
Capping station P.3
Wiper P.4
Twice a week
(on Monday and Friday)
Washing the Head Nozzle
(When Using the PR-200 ink Ver.2)
P. 5
Once a week
(at the end of the work on
weekend)
Exterior P.7
Waste ink tank P.7
Around station P.8
Once a week or two weeks
Replacing the carriage filter P.9
Replace the Cotton pad(MBIS) P.10
Once a month
Refill and check the cooling water P.10
Washing the Head Nozzle
(When Using the PR-200 ink Ver.3)
P. 5
Once every three months Replacing the wiper P.10
Tools required for maintenance
• Cleaning stick (SPC-0527)
• F-200/LF-200 maintenance liquid (SPC-0568)
• Maintenance liquid (C-ML013-Z-B2-1-KW) *When using the PR-200 ink
• Gloves
• Soft fabric
UV curing ink (UV ink) is used in this machine.
Make sure to wear the attached safety glasses and gloves.
To Next Page
Need help?
General