5
3. Periodically care (Twice a week / Only models equipped with PR-200)
On models equipped with the PR-200, ink may clog the nozzle.
Please check the version on the label of the PR-200 ink cartridge, pack, or bottle, and clean the nozzle.
Please clean the nozzle twice a week for Ver.2 and once a month for Ver.3.
(1) Nozzle (“Nozzle Wash (When PR-200 ink using)” Chapter 4 of the Operation Manual)
1
Move the carriage.
2
Clean the wiper and the bracket.
• Remove the wiper by holding the protrusions at its both
ends.
• Wipe off the ink sticking to the wiper and bracket with a
clean stick soaked in the F-200/LF-200 maintenance
liquid.
Label Ver. notation position
220ml Cartridge 250ml Bottle
600ml Pack 1L Bottle
To Next Page
Loading...
