MIMAKI JV3 Series - 休眠狀態自動清洗功能 [SLEEP Clean]

4
休眠狀態自動清洗功能 [SLEEP clean]
To prevent clogging while the power switch has been turned off, ink is ejected from the
head at regular intervals. The head itself must be cleaned also at regular intervals
which are set as shown below.
STEP
1.按下 [FUNCTION] 鍵 .
2.按往下鍵 [ ]鍵直到LCD顯示[MAINTENANCE]
3.按下 [ENTER] 鍵 .
[STATION] LCD顯示.
4.按上下鍵 [ ] 鍵直到LCD顯示 [SLEEPclean].
3.按下 [ENTER] 鍵 .
5.按上下鍵 JOG-key [
] or [ ] 選取所需休眠
自 動清洗時間.
4h, 8h, 12h, 24h, OFF
6.按 下 [ENTER] 鍵 .
[SLEEPclean] LCD顯示 .
7.按下 [END] 鍵2下.
機 器回到"LOCAL"模式 (LCD顯示).
FUNCTION
SET UP < ENT >
FUNCTION
MAINTENANCE < ENT >
MAINTENANCE
STATION < ent >
MAINTENANCE
SLEEPclean < ent >
SLEEPclean
INTERVAL = 8h
SLEEPclean
INTERVAL = 12h
MAINTENANCE
SLEEPclean < ent >
< LOCAL >