MIMAKI JV3 Series - FINE Y Si, FINE Y Re, FINE Y Bi Adjustments

8.按下 [ENTER] 鍵 .
[SCAN COUNT] LCD顯示.
9.按上下鍵 [ ] or [ ] 一直到LCD顯示
[TEMP.DIFF.].
10.按下 [ENTER] 鍵 .
11.按上下鍵 [JOG-key] ,[
] or [ ] 選取所需
刮板(Wiper) 溫度範圍,使刮板動作有效.
•INT.WIPING function is effective in case the
outside temperature is lower than the print
heater temperature setting, and the temperature
difference exceeds the value of “TEMP.DIFF.”.
12.按下 [ENTER] 鍵 .
[TEMP.DIFF.] LCD顯示.
13.按下 [END] 鍵 .
[INT. WIPING] LCD顯示.
14.按下[END] 鍵第二下,然後機器回到
LOCAL 模式 .
MAINTENANCE
INT.WIPING < ent >
INT.WIPING
SCAN COUNT < ent >
INT.WIPING
TEMP.DIFF. < ent >
INT.WIPING
TEMP.DIFF. = 25 ° C
INT.WIPING
TEMP.DIFF. < ent >
INT.WIPING
TEMP.DIFF. = 20 ° C
< LOCAL >
8