MIMAKI SWJ-320 S2 - Page 156

© 2013 MIMAKI ENGINEERING CO.,LTD. 6.4.12 P.1
R.1.0
1
2
3
4
5
6
7
8
MAINTENANCE MANUAL > Disassembly and Reassembly > Electrical Parts > ID Contact PCB CN032 Simple assy.
Model SWJ-320S Issued 2012.07.19 Revised F/W ver Remark
1.0
Rev.
6.4.12 ID Contact PCB CN032 Simple assy.
 Work Procedures
1. Turn off the main power supply and remove the power plug
from the main body.
2. Open the cover CoverRS.
3. Disconnect the connector from the ID contact PCB.
4. Unscrew the screw, and remove the ID PCB socket together
with the ID contact PCB.
5. Widen the hooks of ID PCB socket, and remove the ID contact
PCB.
6. Reverse the disassembly procedure for reassembly.
After turning off the sub and main power switches, unplug the power cord. Make sure to take 15
minutes before restarting the operation. It is very dangerous if sleep mode functions mistakenly
during the operation.
Moreover, the PCB may be damaged in case electric charge still remains inside.
ID Contact PCB CN032 simple assy.
Screw
Disconnect
the connector.
ID contact PCB
ID PCB socket
Hooks (4 positions)
ID PCB socket
ID contact PCB