MIMAKI TS34-1800A - Page 135

© 2011 MIMAKI ENGINEERING CO.,LTD. 5.1.19 P.1
1
2
3
4
5
6
7
8
R.1.0
5.1.19 TIMER CHECK
 Function
Date and time of the device are confirmed or set.
Past date/time to be input is allowed max. 8 hours back from present time.
Inputting of other date/time becomes an error.
*Machine setting → Same as the time setting
Set value : 20YY.MM.DD HH:MM:00
YY : 00 ~ 50
MM : 01 ~ 12
DD : 01 ~ 31
HH : 00 ~ 23
MM : 00 ~ 59
Returning to the last setting is allowed by pressing [FUNCTION] in the Date, Time Display State (not the Entering
State). (However, the time elapsed after the setting change is added.)
MAINTENANCE MANUAL > Test Items > Test Function > TIMER CHECK
Model TS34-1800A Issued 2011.10.17 Revised F/W ver 1.20 Remark
1.0
Rev.