MIMAKI TS34-1800A - Page 168

© 2011 MIMAKI ENGINEERING CO.,LTD. 6.2.2 P.2
6.2.2 Head Unit
1
2
3
4
5
6
7
8
8. Remove the damper joint Assy and wrap with waste cloth.
9. Place the waste cloth around the head unit so as not to
contaminate the platen.
10. Remove the screws and the head.
11. Remove the damper.
12. Remove the 34 print head cover.
13. Remove the mini memory PCB.
Wrap with waste cloth.
Damper Joint Assy
Damper
Mini memory PCB
34 print head cover
R.1.0
MAINTENANCE MANUAL > Disassembly and Reassembly > Ink-related Parts > Head Unit
Model TS34-1800A Issued 2011.10.17 Revised F/W ver 1.20 Remark
1.0
Rev.