MIMAKI TS34-1800A - Page 182

© 2011 MIMAKI ENGINEERING CO.,LTD. 6.3.1 P.2
6.3.1 X-axis Motor Assy
1
2
3
4
5
6
7
8
5. Remove the screws (x3) attached to the XM bracket, and
remove the X-axis motor assembly.
6. Reverse the disassembly procedure for reassembly.
The belt tension does not need to be adjusted.
R.1.0
MAINTENANCE MANUAL > Disassembly and Reassembly > Drive System > X-axis Motor Assy
Model TS34-1800A Issued 2011.10.17 Revised F/W ver 1.20 Remark
1.0
Rev.