MIMAKI TS34-1800A - Page 188

© 2011 MIMAKI ENGINEERING CO.,LTD. 6.3.4 P.1
1
2
3
4
5
6
7
8
6.3.4 Y Drive Belt
 Work procedures
1. Remove the following covers.
• Front cover
• Y cover F
• P Cover U
• P Cover L
• C Cover
2. Remove the Damper.
• "6.2.1 Damper"
3. Remove the head assy screws and separate them from the belt
holder.
4. Loosen the screws from the Y-SP plate on the left side of the
main body, and release the tension of the Y drive belt.
Turn the main power OFF when turning the power OFF. It is very dangerous if sleep mode functions
mistakenly during the operation.
Y Drive Belt
Y Drive Belt 33
Loosen
Y SP Plate
R.1.0
MAINTENANCE MANUAL > Disassembly and Reassembly > Drive System > Y Drive Belt
Model TS34-1800A Issued 2011.10.17 Revised F/W ver 1.20 Remark
1.0
Rev.