© 2011 MIMAKI ENGINEERING CO.,LTD. 6.3.6 P.2
6.3.6 Wiper Unit
1
2
3
4
5
6
7
8
5. When replacing only the motor, remove the wiper drive link and
the screws to detach the motor.
* The clearance between the motor and base should be 0.5 mm
when the motor is replaced.
6. Reverse the disassembly procedure for reassembly.
R.1.0
MAINTENANCE MANUAL > Disassembly and Reassembly > Drive System > Wiper Unit
Model
TS34-1800A
Issued
2011.10.17
Revised F/W ver
1.20
Remark
1.0
To Next Page
Loading...
