MIMAKI TS34-1800A - Page 208

© 2011 MIMAKI ENGINEERING CO.,LTD. 6.4.10 P.2
6.4.10 HDC FPC 180 Assy
1
2
3
4
5
6
7
8
3. Remove the screws attaching the electrical box.
4. Remove the cover and connectors together from the bottom of
the electrical box.
5. Tilt the electrical box toward the front, and remove the HDC
FFC 180 assy from the back of the box.
6. Loosen the four FFC fixing metal screws, remove the block
core on the center of the main body, and then remove the HDC
FFC 180 assy from the center of the main body.
7. Reverse the disassembly procedure for reassembly.
Electrical Box Bottom Cover
HDC FFC 180 Assy
Block core
HDC FFC 180 Assy
Screw
R.1.0
MAINTENANCE MANUAL > Disassembly and Reassembly > Electrical Parts > HDC FPC 180 Assy
Model TS34-1800A Issued 2011.10.17 Revised F/W ver 1.20 Remark
1.0
Rev.