MIMAKI TS34-1800A - Page 215

© 2011 MIMAKI ENGINEERING CO.,LTD. 6.4.16 P.2
6.4.16 ID Contact PCB CN032 Assy
1
2
3
4
5
6
7
8
5. Remove the connector and loosen the screws to take off the ID
contact PCB CN032 assy.
6. Remove the screws and then remove the ID contact PCB
CN032 assy.
7. Reverse the disassembly procedure for reassembly.
ID Contact PCB CN032 Assy
Loosen
IDContact PCB CN032 Assy
R.1.0
MAINTENANCE MANUAL > Disassembly and Reassembly > Electrical Parts > ID Contact PCB CN032 Assy
Model TS34-1800A Issued 2011.10.17 Revised F/W ver 1.20 Remark
1.0
Rev.