MIMAKI TS34-1800A - Page 245

© 2011 MIMAKI ENGINEERING CO.,LTD.
8.2.2 P.2
8.2.2 SETUP
1
2
3
4
5
6
7
8
[1]COLOR PATTERN
SETUP :HOST
[1]
COLOR PATTERN <ent>
:ON,OFF
[1]REFRESH
SETUP :HOST
[1]
REFRESH <ent>
LEVEL0 to 3
[1]VACUUM
SETUP :HOST
[1]
VACUUM <ent>
OFF,WEAK,LittleWEAK,
STANDARD,STRONG
[1]FeedSPEED LEVEL
LEVEL : HOST
[1]
FeedSPEED LEVEL<ent>
10 to 200%
[1]AUTO CLEANING
SETUP :OFF
[1]
AUTO CLEANING <ent>
INTERVAL :TYPE
1000mm :NORMAL
10 to 10000mm
:SOFT,HARD
[1]Print. CLEANING
SETUP :OFF
[1]
Print. CLEANING<ent>
INTERVAL :TYPE
1000mm :NORMAL
[1]MEDIA DETECT
DETECT METHOD <ent>
[1]
MEDIA DETECT <ent>
[1]MEDIA DETECT
DETECT ETHOD:SELECT
[1]MEDIA DETECT
CUTTING DETECT <ent>
[1]MEDIA DETECT
DETECT :BOTH EDGE
[1]FEED ORIGIN
SETUP :OFF
[1]
FEED ORIGIN <ent>
[1]SETUP RESET
RESET :ent
[1]
SETUP RESET <ent>
ON
WIDTH
LEFT EDGE,
RIGHT EDGE,NONE
10 to 10000mm
:SOFT,HARD
The feed speed during
bidirectional plotting is
modified (The acceleration
is not modified).
The speed reflected to an actual
feed operation is limited to
150% when using heavy-duty
feeding/take-up device.
[FUNCTION],
[] / []
[FUNCTION],
[] / []
[FUNCTION],
[] / []
[FUNCTION],
[] / []
[FUNCTION],
[] / []
[FUNCTION],
[] / []
[FUNCTION],
[] / []
[FUNCTION],
[] / []
*Initial operation only for the type currently selected
*Only when “SETUP” is ON, the display
changes to the next screen also by
pressing [ENTER].
*Only when “SETUP” is ON, the display
changes to the next screen also by
pressing [ENTER].
:ON
*
:ON
*
LEFT : RIGHT
HOST : HOST
[1]
MARGIN <ent>
-10 to 85mm
[FUNCTION],
[] / []
ROUTINE SETUP
ROUTINE WIPING <ent>
ROUTINE WIPING
SCAN COUNT <ent>
ROUTINE WIPING
SCAN COUNT :50
0 to 9990
ROUTINE WIPING
TEMP.difference <ent>
ROUTINE WIPING
TEMP.DIFF. :20C
1 to 60
R.1.0
MAINTENANCE MANUAL > Operation Flow > Print Mode > SETUP
Model TS34-1800A Issued 2011.10.17 Revised F/W ver 1.20 Remark
1.0
Rev.