MIMAKI TS34-1800A - Page 253

© 2011 MIMAKI ENGINEERING CO.,LTD.
8.4.1 P.1
1
2
3
4
5
6
7
8
R.1.0
MAINTENANCE MANUAL > Operation Flow > Service Mode > #ADJUST
Model TS34-1800A Issued 2011.10.17 Revised F/W ver 1.20 Remark
1.0
Rev.
8.4.1 #ADJUST
#HEAD ADJUST
SLANT ADJUST <ent>
#HEAD ADJUST
HEAD SELECT :12
#HEAD ADJUST
DROP.POS ADJUST <ent>
#DROP POS. MODE
SELECT :HiSPEED SCAN
#DROP POS. HsHg
SELECT :DRAFT
#ADJUST
HEAD ADJUST <ent>
#DROP POS. HsHg/DRFT
ADJUST :Y Bi
#DROP POS. HsHg/DRFT
Y Bi DRAW :ent
#DROP POS. HsHg
SELECT :FINE
#DROP POS HsHg/DRFT
ADJUST :FINE Y Bi
DROP POS HsHg/DRFT
FINE-Y Bi DRAW:ent
#DROP POS. HsHg
SELECT :BASIS SET
#DROP POS HsHg
BASIS SET :ent
#HEAD ADJUST
HeadcondCONFIRM<ent>
#HeadcondCONFIRM
INKvolumCONFIRM<ent>
#INKvolumCONFIRM
PRINT START <ent>
M= 0 M= 0 C= 0 C= 0
Y= 0 Y= 0 K= 0 K= 0
#HeadcondCONFIRM
X POS. CONFIRM <ent>
#HeadcondCONFIRM
Y POS. CONFIRM <ent>
#X POS. CONFIRM
PRINT START :ent
#Y POS. CONFIRM
PRINT START :ent
Pattern drawing
FUNCTION
#ADJUST <ENT>
Pattern drawing
Pattern drawing
#DROP POS. HsHg/DRFT
Y Bi H1 -H1 : 0.0
#DROP POS. HsHg/DRFT
Y Bi H1 -H1 : 0.0
Pattern drawing
Pattern drawing
[]/[]: Modifies the compensation value.
[ENTER]: Finalizes (To the next compensation screen)
[FUNCTION],
[] / []
[] / []
[] / []
[] / []
[] / []
[] / []
[] / []
[] / []
:Normal-SCAN
:-2 to 4
∗[FUNCTION]: All nozzles +1
[REMOTE]: Displays the nozzle row name.
#HEAD ADJUST
STAGGER ADJUST <ent>
#STAGGER ADJUST
PRINT START :ent
[] / []
JOG permitted
#HEAD ADJUST
LevelSurfaceCHK <ent>
#LevelSurfaceCHK
HEAD SELECT :12
#LevelSurfaceCHK
PRINT START :ent
[] / []
#HEAD ADJUST
AVERAGING ADJ. <ent>
#AVERAGING ADJ.
HEAD SELECT :12
#AVERAGING ADJ.
PRINT START :ent
[] / []
Pattern drawing
Pattern drawing
JOG permitted
JOG permitted
Pattern drawing
Pattern drawing
Pattern drawing
#SLANT ADJUST
PRINT START :ent
JOG permitted