EasyManua.ls Logo

MIMAKI TS34-1800A - Media Handling Guidelines

MIMAKI TS34-1800A
262 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
© 2011 MIMAKI ENGINEERING CO.,LTD.
1.3.3 P.1
1
2
3
4
5
6
7
8
R.1.0
1.3.3 Supply Cartridge Control and Selection
Supply cartridge control
Cartridge status indicated by LEDs
Selection and determination of the supply cartridge for the 4-color ink set
supply cartridge switching selection timing
At power-on
When an error occurs in the currently selected cartridge
When a cartridge with higher priority than the currently selected cartridge is inserted
Switching is not executed during printing or cleaning but executed when the machine has returned to LOCAL
mode.
When there is more than one effective cartridge for 1-ink supply path
No. Item Description
1 For the 4-color ink set The machine uses two ink cartridges for 1 supply system and can mount 8 cartridges in
total.
1 supply cartridge is assigned to 1 supply system. The cartridge with less amount of
remaining ink is used first by toggle switching.
Switching between cartridges for ink supply occurs under any of the following
conditions:
“INK END” during printing
“INK NEAR END” during filling
Ink IC warning
When the cartridge is removed
When executing Ink use-up cleaning
2 Except for the 4-color ink set
(filling 6-color ink set)
Since there is 1 ink cartridge per supply system, all 8 cartridges are supply cartridges.
LED Status Explanation
Green Lit Supply cartridge
Red Blink INK END, INK NEAR END, Expiration:1MONTH
Lit NO CARTRIDGE
WRONG INK IC
Errors related to PIC, namely, NON-ORIGINAL INK, WRONG INK IC, Kind of INK, Color
of INK, WRONG CARTRIDGE and Expiration:2MONTH
INK REMAIN ZERO
A cartridge having no remaining ink after execution of ink use-up cleaning (only in 4-color
use).
Priority Cartridge status
1 The cartridge having the smaller amount of remaining ink is selected.
2 If there is no distinction at “1”, the cartridge closer to the expiration date is selected.
3 If there is no distinction at “1” and “2”, the cartridge in the smaller slot number is selected.
MAINTENANCE MANUAL > Operating Principle > Ink System > Supply Cartridge Control and Selection
Model
TS34-1800A
Issued
2011.10.17
Revised F/W ver.
1.20
Remark
1.0
Rev.

Other manuals for MIMAKI TS34-1800A

Related product manuals