MIMAKI TS34-1800A - Reducing Print Stripes (MAPS)

© 2011 MIMAKI ENGINEERING CO.,LTD. 3.3.1 P.1
1
2
3
4
5
6
7
8
R.1.0
MAINTENANCE MANUAL > Workflow > Electrical Parts > Replacement of the Main PCB Assy
Model TS34-1800A Issued 2011.10.17 Revised F/W ver. 1.20 Remark
1.0
Rev.
3.3.1 Replacement of the Main PCB Assy
 List of replacement procedures
Item Work operation Description Ref.
Advance
preparation
1.

Parameter upload Before the printed-circuit board is replaced, upload its
parameter to the PC.
Covers
2. 
Removal of covers, etc. Remove the electrical box cover. 6.1.1
Main PCB
Assy
3.

Removal of the main PCB assy. Remove the main PCB assy. 6.4.2
4. 
Mounting of the main PCB assy. Mount the main PCB assy.
Check
5.

Parameter download Download the parameters which were uploaded in operation
“1”.
6. 
Adjustment of the motor current Adjust motor current in case a hunting noise occurs. 4.2.13
Covers
7.

Mounting of the covers. Mount the covers that have been removed. 6.1.1
Main PCB Assy