Chapter 6 Maintenance
137
1
In LOCAL mode, select [MENU] > [Maintenance], then press the [ENTER] key.
• The Maintenance menu is displayed.
2
Select [Station] > [Carriage Out] > [Head Maint.], then press the [ENTER] key.
• The carriage moves to the maintenance space.
3
Open the maintenance covers.
4
Clean the underside of the UV-LED lamp.
• Wipe off any ink adhering to the UV-LED lamp underside using a cleaning stick moistened with
washing liquid.
• Wipe off the washing liquid. Make sure none remains.
5
Clean around the print head on the underside of the carriage.
• Wipe off any ink adhering to the carriage underside using a cleaning stick moistened with washing
liquid.
• Wipe off the washing liquid. Make sure none remains.
6
To Next Page
Loading...
