Mindeo CS3290-2D - Page 37

25
Multiple-scan setting
Single-scan setting
Option bar code
Option
Alpha. entry
02*
*
Inform the result of wired
transmission for handheld unit
Disable
00*
*
Enable
01
Bind
Join
Show channel information of handheld unit※
Note: The settings indicated with (※) are valid only when the cradle is in upgrade ready mode.
Cradle entering upgrade ready mode
Keep pressing the S button on the cradle, until the blue LED is flashing. Then three LEDs will all be
turned ON, this indicates the cradle being upgrade ready mode.