Mindeo CS3290-2D - Decode illumination and decode aiming pattern

39
Decode illumination and decode aiming pattern
Decode illumination mode: Enable illumination causes the scanner to turn on the illumination to aid
decoding. Disable illumination to turn off illumination for the scanner during decoding. Better quality
images could be obtained with illumination support. The effectiveness of the illumination decreases as
the distance to the target increases.
Decode aiming pattern: When this option is enabled, the scanner will project the aiming pattern during
the code capture.
Multiple-scan setting
Single-scan setting
Option bar code
Option
Alpha. Entry
Decode illumination
Always Off
00
Always On
01
Flashing
02*
*
On when reading
03
Decode aiming pattern
Always Off
00
Always On
01
On before reading
02
On when reading
03*
*