Mindeo CS3290-2D - Distributed Coordination Wireless Communication Setting for Cradle

26
3. Distributed coordination wireless communication setting for cradle
Wireless network topology for cradle: There are two kinds of wireless network topology that can be
employed: point coordination and distributed coordination.
Radio power level for cradle: By selecting, you can change the radio frequency power level for cradle.
Multiple-scan setting
Single-scan setting
Option bar code
Option
Alpha. entry
Wireless network topology for
cradle※
Point coordination
00*
*
Distributed coordination
01
Radio power level for cradle
10dbm
01*
*
7dbm
02
5dbm
03
0dbm
04
-5dbm
05
-10dbm
06
-15dbm
07
Show channel information of Cradle※
Note: The settings indicated with (※) are valid only when the cradle is in upgrade ready mode.
Cradle entering upgrade ready mode
Keep pressing the S button on the cradle, until the blue LED is flashing. Then three LEDs will all be
turned ON, this indicates the cradle being upgrade ready mode.