Need help?Do you have a question about the Mindray BeneFusion SP3 and is the answer not in the manual?
General| Brand | Mindray |
|---|---|
| Model | BeneFusion SP3 |
| Category | Water Pump |
| Language | English |
Manual provides detailed information on hardware composition, installation, disassembly, test and troubleshooting.
Manual is for professional biomedical engineers, authorized service personnel, and after-sales representatives.
Manual version is subject to update without notice; current version is 3.0, dated 2020-07.
Basic safety information for users, including DANGER, WARNING, CAUTION, and NOTE definitions.
Explanation of various symbols used on the equipment and in the manual.
Overview of the BeneFusion SP3 syringe pump, its components, and optional functions.
Details of the syringe pump's main unit, including front, rear, side, and bottom views.
Explains the hardware architecture and principles of the SP3, including control, sensor, and keypad boards.
This chapter describes procedures for testing the syringe pump with recommended tools and frequency.
Details on preventive maintenance items for the syringe pump, including visual inspection and running tests.
Specifies the recommended frequency for maintenance tasks like overall inspection, power-on tests, and calibration.
Guidelines for visually inspecting the syringe pump's enclosure, keys, labels, and connections.
Procedure for performing a power-on self-test, including checks for speaker, buzzer, and alarm lamp.
Procedures for calibrating the syringe pump, including syringe, pressure, and sensor calibration.
Checks for general functions and battery-powered operation of the syringe pump.
Procedures for performing electrical safety tests to detect abnormal electrical hazards.
Guidelines for cleaning and disinfecting the syringe pump using recommended agents.
Lists possible causes and corrective actions for syringe pump problems.
Instructions for replacing PCBs and major components of the syringe pump.
Method for entering fault diagnosis screen and checking pump status parameters.
Details system fault and exception codes, possible causes, and handling methods.
Lists the necessary tools for disassembly and replacement of parts.
Provides step-by-step instructions for disassembling the syringe pump's main components.
Exploded view and parts list for the main host unit of the syringe pump.
Exploded view and parts list for the front cover assembly of the syringe pump.
Exploded view and parts list for the pump module assembly.
Exploded view and parts list for the rear cover assembly.
List of miscellaneous parts and accessories for the syringe pump.
Lists the tools required for upgrading the syringe pump software and brand library.
Detailed steps for upgrading the syringe pump's software using a PC.
Instructions for downloading and updating the brand library for the syringe pump.
To Next Page
