Need help?Do you have a question about the Mindray BeneFusion uVP and is the answer not in the manual?
General| Model | BeneFusion uVP |
|---|---|
| Type | Volumetric Pump |
| Flow Rate Range | 0.1-1200 mL/h |
| Flow Rate Accuracy | ±5% |
| VTBI Range | 0.1-9999 mL |
| Bolus Rate | 1200 mL/h |
| Occlusion Pressure | High: 900 mmHg, Low: 200 mmHg |
| Pressure Limit - High | 900 mmHg |
| Pressure Limit - Low | 200 mmHg |
| Alarms | Occlusion, Air-in-line |
| Power Supply | AC 100-240V, 50/60Hz |
| Display | color LCD |
| Compatible Infusion Sets | infusion sets |
| Dose Rate Range | 0.1-1200 mL/h |
States warranty terms and conditions for the product.
Details of the manufacturer, Shenzhen Mindray Scientific Co., Ltd.
Details of the EC representative, Shanghai International Holding Corp. GmbH.
Explains the purpose and scope of the manual.
Defines the target users for this manual.
Notes that illustrations are for example only.
Explains text formatting conventions used in the manual.
Provides essential safety guidelines and warnings for using the pump.
Lists critical safety warnings to prevent severe injury or death.
Outlines potential hazards and practices to avoid minor injury or damage.
Provides supplementary tips and information for optimal product use.
Describes the primary function and application of the infusion pump.
Specifies the patient population and conditions for pump usage.
Identifies the qualified personnel authorized to operate the pump.
Specifies the age groups for which the pump is designed.
Lists the medical situations where the pump is applicable.
Lists conditions where the pump should not be used.
Details any known adverse effects associated with the pump's use.
Explains the indirect clinical advantages of using the infusion pump.
Identifies the component of the system that comes into contact with the patient.
Safety precautions for preparing and setting up the infusion pump.
Specifies the necessary environmental conditions for pump operation.
Instructions for physically installing the infusion pump.
Guides on the correct installation of the drop sensor component.
Steps for initial setup and configuration of the infusion pump.
Instructions on how to charge the pump's battery.
Steps for initial setup and configuration of the infusion pump.
Instructions for properly loading the infusion set into the pump.
Procedure for initiating an infusion therapy session.
Steps for purging air or fluid from the infusion line.
How to administer a bolus dose of medication.
Instructions for setting the KVO rate for continuous low-flow infusion.
Procedure for changing the IV fluid container during operation.
Steps for safely removing the infusion set from the pump.
How to check the total volume of fluid infused.
Procedures for safely powering down the infusion pump.
Instructions for placing the pump into its docking station.
Explanation of how to set up and use relay infusion functionality.
Safety guidelines related to the pump's alarm system.
Explains the different types of alarms and their meanings.
Information about how alarms are displayed on the screen.
How to temporarily mute the audible alarm.
Details on the pump's integration with nurse call systems.
Provides guidance on how to resolve common alarm conditions.
Specific information and warnings related to occlusion alarms.
Warnings regarding settings within the menu options.
Additional notes on using the menu options.
Details on operating the pump in rate or time mode.
Instructions for using the drip mode for infusions.
Explanation of dose calculation and units in dose mode.
Information about the loading dose mode feature.
Operating parameters for micro-infusion mode.
How to configure and use intermittent infusion mode.
Settings and operation for ramp infusion mode.
Details on dose calculation and units in dose time mode.
Precautions for creating and loading drug libraries.
Information about modifying predefined drug library parameters.
Critical warning about patient data management.
Safety precautions for network setup and use.
Guidance on changing password-protected maintenance settings.
Safety precautions to be followed during equipment maintenance.
Safety guidelines related to the pump's battery.
Instructions for the proper disposal of the pump and its components.
Warnings regarding cleaning agents and procedures.
Precautions to take when cleaning and disinfecting the equipment.
Warning about using specified accessories.
Precautions for storing and using accessories.
Classification of the equipment according to IEC standards.
Operating and storage conditions for the pump.
Details on AC/DC power input and battery specifications.
Technical details of the rechargeable lithium-ion battery.
Information on the pump's display, LEDs, and connectors.
Specifications related to the pump's wireless network capabilities.
Technical details on infusion accuracy, rates, and occlusion pressure.
List of compatible infusion sets for use with the pump.
Data on occlusion alarm delays and bolus volumes.
Graphical representation of infusion accuracy at different rates.
Graphical representation of infusion accuracy at 25ml/h.
System specifications for the pump's operating environment.
Electromagnetic compatibility information and guidelines.
Compliance with radio frequency regulations and directives.
To Next Page
