11 - 1
11Networked Communication
• Wireless network designing, deploying, debugging, and maintenance should
be executed by the service personnel or authorized technicians.
• Always set the wireless network according to local wireless regulations.
• Data communication for all network functions must be performed within a
closed network or within a virtually isolated network provided by a hospital.
The hospital is responsible for ensuring the security of the virtually isolated
network.
• Keep network authentication information, for example password, safe,
protecting the network from being accessed by unauthorized users.
• Do not connect non-medical devices to the network.
• If wireless network signal is poor, there may be a risk of CMS data loss.
• RF interference may result in wireless network disconnection.
• Disconnecting from the network may result in CMS data loss and function
failure. Check the patient in case of network disconnection and solve the
network problem as soon as possible.
• Ensure that the IP address setting is correct. Changing the network settings
may result in network disconnection. Contact your service personnel if you
have any problems on setting the IP address.
• The equipment can communicate with the CMS only when it is properly
connected the CMS. If the network is interrupted, you are not able to view the
infusion information through the CMS.
To Next Page
Loading...