A - 1
A Product Specifications
A.1 Classifications
The equipment is classified, according to IEC60601-1:
A.2 Environmental Specifications
Storage Conditions: Corrosive-free and ventilated
• The pump may not meet the performance specifications if stored or used
outside the specified temperature and humidity ranges. If the performance
of the equipment is degraded due to aging or environmental conditions,
contact your service personnel.
Type of protection against
electrical shock
CLASS I EQUIPMENT, equipment energized from an
internal electrical power source.
Degree of protection against
electrical shock
Defibrillation-proof type CF applied part (direct cardiac
application)
Mode of operation Continuous
Degree of protection against
harmful ingress of water
IP33
Degree of safety of application
in the presence of flammable
anesthetic mixture with air or
with oxygen or nitrous oxide
The equipment is not suitable for use in the presence
of a flammable anesthetic mixture with air or with
oxygen or nitrous oxide
Degree of mobility Portable
Item
Temperature
(ºC)
Relative humidity
(noncondensing)
Barometric (kPa)
Operating conditions 5 to 40 15% to 95% 57.0 to 107.4
Storage conditions –30 to 70 10% to 95% 16.0 to 107.4
To Next Page
Loading...