Mindray BeneFusion SP3 - Test and Maintenance; Introduction; Test Report

3-1
3 Test and Maintenance
3.1 Introduction
To ensure the syringe pump always functions properly, qualified service personnel
should perform regular inspection, maintenance and test. This chapter describes the
procedures for testing the syringe pump with recommended test tools and frequency.
The service personnel should perform testing and maintenance as required and use
appropriate test tools.
The test and inspection procedures provided in this chapter are intended to verify
that the syringe pump meets the performance specifications. If the syringe pump or
a module fails to perform as specified in any test, repairs or replacement must be
done immediately. If the problem persists, contact our Customer Service
Department.
CAUTION
 All tests should be performed only by qualified service personnel.
 Service personnel should possess a working knowledge of the test tools
and make sure that test equipment and cables are applicable.
3.1.1 Test Report
After the professional maintenance personnel completes the test, please make a
record according to the following test report.
Test Equipment
Name Equipment model Equipment symbols
Test records
No.
Test items
Test point
Test result
1
2
3
4
5
Test judgement
Qualified or not: Tested by: Test date: