Image Optimization 5-59
5.10.7.2 iPage Basic Functions and Operations
<1> A plane <2> B plane (the current
reference image)
<3> C plane
<4> Y-axis <5> X-axis <6> Central section line (Current
active section line)
<7> Section line <8> Space between two
planes
<9> Image parameter
<10> Wire cage <11> Section plane order
number
<12> Section plane position (to the
central plane)
<13> Central plane mark <14> Green box on the active image
Layout
The system supports several types of display layout: 2*2, 3*3, 4*4 and 5*5. Tap the
corresponding icon on the touch screen to select, and the selection [Slice Number]
changes accordingly.
Reference image
Tap [A], [B] or [C] to select the reference image.
Slice and slice line
z Central slice: the central plane which corresponds to the central slice line is the
central slice, marked with a green “*” in the top-left corner of the image.
z Tap to position the slice lines vertically, and tap to position the
slice lines horizontally.
z Active slice: the central plane which corresponds to the green slice line is the
active slice, marked with a green box. The default active slice is the central slice.
To Next Page
Loading...
