Mindray DC-35 - 12.5.3 MedTouch;MedSight Preset; 12.6 Maintenance; 12.6.1 Option

Setup 12-13
Name Description
Service Name Name of the device, cannot be empty
IP Address
IP address of the PC installed with iStorage software, cannot be
empty
Connect
Press to verify connection with the PC server. On PC server, if the
storage path has not been confirmed, a dialog box will pop up and
guide the user to set it. If the storage path on PC has already been
set, here it displays connection successful after clicking this button.
Add Click it to add the new service to the service list.
Update To save the changed parameters.
Delete Click to delete the selected service in the service list.
Default Click to set an selected item in the list as the default iStorage server.
 Add a network service:
1. Set the network server properties as described above.
2. Click [Add] to add the service to the Service list;
3. Select the added service in the service list, you can delete it.
 Modify a network service:
1. Select the service to be updated in the service list.
2. You can see properties in the Configure Service area.
3. Modify the parameters and click [Update] to update setting.
Tips: in order to make network storage function normally, setting of the sharing folder of
the PC server in advance is a must, e.g. machine name, IP address, should be confirmed
at first.
12.5.3 MedTouch/MedSight Preset
You can set environment for MedTouch/MedSight here and then use the
MedTouch/MedSight function by mobile phone or tablet computers. See
MedTouch/MedSight manual for details.
12.6 Maintenance
In the Setup menu, select [Maintenance] enter the screen. If you require other
maintenance functions, please contact Mindray Customer Service Department or sales
representative.
12.6.1 Option
The system enters Option page after you enter the Maintenance screen. In Option list,
the system lists out all the system supported options and the installation status (Disabled
or Installed).
 Install and uninstall
z Click [Install] to begin the installation of a disabled option.
z Click [Uninstall] to begin the un-installation of an already installed option.